I will notify you in the installation of door accessories, but you still want to build everything beautifully and neatly, you need telescopic add-ons on the middle doors. Far from croc by croc, it’s possible, so why should such accessories be scared and how to figure out the telescopic additions on the small doors and on the input doors, but for practitioners, we will show you the installation of additional ones with our own hands.
Telescopic add-ons for inter-room doors are the most beautiful entry for the majesty-cob.
For a cob, let's pick it up so that it vibrates and telescopes vibrates to be seen as an animal.
Doborom Name the bar, as it stands on the end part of the door opening and is located between the door frame (lute) and the door frame, which framing the door opening.
Dobori vstanovlyuyutsya far from all doors. If the thickness of the wall doesn’t change 140 mm, then you don’t need it in principle. Some fittings will be installed, only if the door opening is located on the product wall, or the simple and the box does not stand out, so I will turn over the end of the wall.
There are three types of add-ons available:
- Telescopic designs;
- Straight planks from the edge;
- Straight planks without edge.
Between themselves the additional planks are designed to be deprived of the technology of installation and the callous viglyad.
The yak is shown on the diagram of a variant with an edge and without, it may appear without the appearance of a central edge. The most practical functions of the region are not a vison, only decor. The price of planks without the edge of the trocha is lower, ale more, such an economy is not the best choice.
If it’s too much to destroy, then the gentlemen will have to either glue the butt of the bar, or pick the farbah to match the excess. Offended by options in whatever kind of vipadku be mindful and see the stench, it seems soft, not even beautiful.
Telescopic add-ons on the small doors from the large straight lines show a groove on the butt, which is too small. On the protylezhny side in such constructions there can be a spike, a straight spine or such a groove.
Here є a small nuance, for the normal installation of a telescopic extension on the door frame, there is a special groove that protrudes. Have your own devil too little, the brothers are not simple, but G-podbnі. Moreover, the groove on the box is pierced by the factory minds because of the special tools. At home with your own hands, which is no worse than the well-informed mayor, such a robot doesn’t need power.
For telescopic access, it is necessary to remove the door frame with a groove, and I will need it.
Before the speech, you can install it on your own straight lines, then you can use the instructions for installation and practical pleasure that you can know the choice of this product.
Thin vibora
I will pick up the accessories for the cupuvati all at once, at once from the door frame, so that when the door frame is installed, it will be important to see the order.
Vibir planks for size
Telescopic add-ons for inter-room doors and a similar design on the out-door doors are depleted of material and materials. We will talk about the material three years later, but at the same time we will pick it up, as it is possible to find out the telescopic add-ons.
Telescopic vibrator for small doors starting at 10 mm.
So, since the design is possessed by an end groove, її tovshina cannot be less than 10 mm. If I want to be fair, then I want to see the slats, which are mostly close to 7 mm in size, but in such slats along the edges є the lining will fix the groove.
Tovshchina add to the small doors to be installed close to 10 - 14 mm. From the entrance doors it can be victorious, but all the same, if you allow it, then for the entrance door protrudes more beautifully the brothers planks 15 - 25 mm.
Pid protrudes for the entrance doors of additional telescopic strips, bazhano brothers tovstishi.
On the windows of the budding shops, you can at once know telescopic supplementary slats from 90 mm to 400 mm. Ale best running sizes є 90 mm, 130 mm and 170 mm.
The most common telescopic designs may be 90, 130 and 170 mm in size.
If you do not need a standard one, the additional level is even wider, then you can replace it in any kind of master, so that you can specialize on the prepared doors or select furniture. Alternatively, you can take a good walk and pick up such a vibration from a number of planks.
As it is more difficult to finish sticking straight strips, telescopic designs are easy to stick behind the addition of thin strips, on the diagram below tsey element of the design of instructions yak "fix element".
Take a wide selection of telescopic slats in the warehouse of special difficulties.
As soon as possible, then the dimensions of the telescopic strips can be varied in the range from 2150 mm to 2500 mm. For thin small doors, for example, in services, there are no more strips of doors, from them there are fewer exits.
Before the speech, in stores there are often substandard additional planks, for example, trimmed or chipped, so they can be worn, such planks are really cheaper. If it’s a necessary color, then you can spare it by taking 2 normal slats from the bottom to the top and 1 not standard, from the top crossbar, and even if all one is done, the part is updated.
Standard complete set of constructions with telescopic extensions.
Why be timid to add
Vzagalі additional planks are made from MDF, natural wood, chipboard, plastic and metal. Ale telescopic constructions are made of wood, from MDF and chipboard.
- Natural wood - add more from natural wood. If you have an empty door with a canvas with a lamina, then the dissonance between a wood finish and a lamina will be even worse;
If you are trying to get a telescopic goodness with your own hands, then the finest material will be a natural tree itself.
- MDF is a Danish material at a time that is not very popular with the preparation of additional materials. MDF is not afraid of vologosti, to reach the stiff to the mechanical steps and to get a decent vart. Plus, for wood doors, you can take MDF pasted over with natural veneer, which will be significantly cheaper, no more wooden dobir;
Veneered MDF visually does not look like natural wood.
- Particleboard - the tsei option can be smartly nazivati budget. Additional planks from laminated chipboard have been found cheaper from telescopic structures, but they will end at all. Chipboard is afraid of vologosti plus thin strips in the grooves it is easy to break, to that є an alternative, more beautiful from the installation of chipboard, is introduced.
MDF is the optimal material for telescopic extensions.
Yak stand up telescopic dobir
As soon as they were guessed, the installation of the telescopic accessory was somewhat simpler with the installation of its direct brothers. Here smut the correct size of the slats, but everything is simple.
As a rule, all telescopic add-ons are provided with slots from both sides. So you will need to drive the axle out, or insert a part of the groove from the side of the door frame and a thorn, when it is overshadowed, insert it into the groove of the door frame.
Schob dobir uvіyshov to the groove on the door box, part of the groove on the new need for visualization.
If you want to get lost, just insert the L-like excess into the groove for goodness and adjustment, everything just fell flat. If it’s too much to bite to the wall, then put the dodatk bar on the glue is not sensible, plus the non-glued design can be used at any time. On the video at the ts_y statty, the entire installation of indications by hand.
Visnovok
Yak bachite, telescopic dobir just mount. Do not forget about the recommendations that you gave when choosing the material and everything you see.
Doors play an important role in interiors of any kind. Even before it was established, the formalization of the varto comes with a great view. The door is mali, an aesthetically pleasing viglyad, which, as a rule, is equipped with dodatkovy strips. How can I use the function to add for inter-room doors and how to set it up correctly? See the statistics for information on food and nutrition.
Vyrobi are special planks, which are horizontal and vertical, different sizes and textures. Їх vstanovlyuyut at the door opening mіzh platband and box. The need for a ts'omu wine, if you need to mask the defect, give the aesthetics of the doors.
For those who still need it, add the width of the door frame to the width of the day. For the very reason, the name appeared - a dobirnik, tobto wide mowing, which is curled up, at the prodigies. In a standard household, if they have an apartment or if they are prompted for an individual project, then they cannot cope with their own employees too much, add additional help to accommodate “goals” of everyday life. Todi design and inter'er fill up the completed view.
Vrahoyuchi the importance of the element, take it to the utmost respect, and those who do the dodatkova board are to blame for the fabric that is as similar as possible to the door in the texture, color, and style.
Reasons for setting the planks
Doors are needed from quiet ones, if wide openings have appeared in the surroundings.
Schob bulo zrozumilishe, guided by the butt. Door wall width 200 mm. 70 mm, of which cross the box and 130 mm, close with an extension. Dodaymo 20-30 mm for the groove and the required size of the strip (150-160 mm). An additional element is required only because it is too much to plan on two sides: inner and outer.
The ordering of add-ons is obviously a new trend, which is gaining popularity. Think over, how to expand the door frame, more beautifully than vicoristovuvati specially prepared planks. Oskilki obviously too much not to empty the wall. Dobory vipuskayutsya of the pink width and dozhini, so the stench will raise the space between the mows and the door leaf.
Materials and constructive features
Falsely, the form is formed by the method of attaching the views and additions, it can be as follows:
Get the items from the children's materials. Falling out of the vicorist sirovini, add wood, plastic or MDF for the interior doors.
Trees Dobir vibrate, as a rule, from natural wood. Vikoristovuyt is clear, beech, oak and conifers. Dobirny timber will be cut or grooved. Most importantly, the door leaf and the additional element will be prepared from one material. Tse allow the uniqueness of the visual dissonance.
Dobir s MDFє the most requested. It looks like a small carriage, style up to mechanical steps and easy installation. Yogo vygotovlyayut from the fibrous fraction, and from the top cover with laminated plavkoyu or natural veneer. So dobory become uncompromising additions to the yak for doors from wood, and for empty door leaf.
Elementi s Pvc it's just plastic Dobori for doors can be brought up to budget options. The smell may not be too high, just to be mounted and not to require additional service. Most often it is for the entrance doors.
Yak correctly vibrate additional elements
Perche, on the next step, you will be respected when choosing materials for additional virobes, and all the confusion with the door leaf. As I said earlier, for the hopefulness and harmony of the design, the stench may come from one side. The most beautiful elements of the cupuvati at once from the door.
The edge is important and the quality of the opposite material. The plank is not to blame for the mother of the same chips and crevices. The smooth surface without defects indicates the good quality of the viroba.
If your vibration falls on the telescopic add-ons to the middle doors, then when you fall into the first place, it is necessary to change to the appearance of the brick elements. The prices are for special factory grooves, the shape and size of which are individually selected up to all small doors.
Varto take to respect the value of the goods. We will change the brands and virobniks more often. Cheaper analogs are unlikely to be more visceral.
Before buying a product, you need to be sure to pay attention, and you need to know how to add additional items. As a standard, 2.5 slats are installed on the door.
Rosemiri add-ons for interior doors
Doors can be added to any size, but for a small block the most suitable for standard strips. The comradeship of the supplementary element is to blame for the production of the groove, which was mounted on the door frame. Zazvychay, it becomes from 10 mm to 16 mm. Naybіlsh required width of additional add-ons for intermediate doors can be adjusted from 70 to 200 mm. As soon as you can see more, there is a way of education. The height of the parts is 2100 mm.
Outside the standard sizes, the slats are made from the material required by the deputy, from the general dimensions. Until the end of the option of a message, go into the fact that you live near the apartment or a booth with unseen plans.
Schob independently depends on the parameters for good, it is necessary to change the thickness of the wall, the height and the width of the door opening. Before being removed, a small stock of 1-2 cm is required.
Importantly, all doors, which are available at special factories, are insured for the singularity of the walls. Vaughn at bagatiokh vipadkah become close to 70 chi 80 mm. Ale yak buti to the vlarsniks of the Zamyskiy or the most extravagant private buddies? They often have a lot of money for apartment options.
In such a vypadku can be covered with sheets of gypsum cardboard, or even more simple - fixing the door to the door. The way is awkward, and it is less than an hour that it is necessary for its implementation. Dear gentlemen of the day to plaster the openings in quiet places, de the box in the street. But all the same, it is less laborious and more effective є the way of establishing additional resources. To that, it is necessary to retreat, as the change is correct.
Add є two stitches, rostasovani at the vertical position, and one horizontal bar. Vaughn is roasted at the top of the opening. In such a rank, the construction of the box itself is ready. Among the most popular materials for making constructions, the most popular є fiberboard, array of MDF. The smell of weariness is available at its price category.
Zamіr and preparatory robots
Installation of additional elements is necessary in the first place in order to secure the platbands. The correct fixation is possible, as the virobi will be spread out with the end to the area of the wall. Naykram better know vimir when selected and installed box. The idea is to be carried out without the need for additional installation.
Put a selection of slid line on the square of the box і trimati її strictly perpendicular to the wall. It is necessary to measure the size of the upper and lower parts of the virob. While the width of one additional piece in different parts can be seen, some pieces of the wall are practically imperfect. Try to put on the papyr, so you do not confuse the parameters of the virob.
It is very important to use a more accurate method to get the most out of the question. All additional contributions are carried out for additional assistance kosintsya and pivnoi reiki... First attach it to the planting place, and apply the other to the surface of the wall. There, de kosinets, cross over to the rail and there will be a vkazivnik of width. The size of the skin cut needs to be reversed, the splinters of the grave can be allowed for any stage.
For carrying out the manipulations, they are made to form the doughs. Tse is easy to cut for the help of a hand file. The electric jigsaw that stationary verstat is also good to go, for the cleverness.
Installation
Install the addon on the middle doors with your own hands, it is easy to do it. For all, it is necessary to start with the type of box. The stench is coming:
- і from the groove;
- without groove.
The first option is the simplest. Well, that's all, it is necessary to carry out the installation of additional. Universality of the manifestation of the groove in that which allows the regulation of the position of the good. And also pristіy zaschadzhu hour. By adjusting the bar, it is possible to drag up to the wall.
Installation on samorizi
First, it’s necessary to zrobiti - tse proverdlit tmno pіd samorіz. As a rule, MDF boards are most often used to grind workpieces, approximately 10 mm. Tse means that the drill has a maximum diameter of 9 mm. More precisely, and there is a need for capital on the small doors to add, the diameter of the drills is those of the self-contained drops.
Bezposeredno screws vibrate such a dozhini, the stench literally went into the canvas of the box. Yakshcho virobi will be nadto dovgim - the tree is treacherous. Obov'yazkovoy wash є vicoristannya drilled on a tree. The stench is characterized by the appearance of special sounds in the form of heads. Make sure to open the opening exactly in the center.
If there is a vibration instrument, it is drilled with holes for self-drilling. At the same time, it is necessary to vibrate not perpendicularly straight, but to drill a drill with a cut. Such a way to allow to close an additional element of the central part of the door frame.
Fasten with vertical screws. Pislya їkhnyoi fіksatsії proceed to the installation of the horizontal bar.
Installation on carnations
Another even more effective way of setting up door accessories is the way of storing carnations.
For installation, it is necessary to drill through small openings, in which case it is possible to hammer in the finishes.
It is critically important - open the door to those who are guilty but the smallest for a whole lot of tsvyakhiv!
When writing, it is necessary to insert the carnations on the guest side, and trim the droplets with nippers. Often a mounting bar is used for hammering flowers.
If all the elements of the attachment are on the mice, you can put the addon and accurately nip the virib, connecting it with the box.
Installation on a pin
The installation of a set of doors for such a principle vikonuє in kіlka developed shvidshe for інші methods. Virobi vstanovlyuyutsya m_stsya. Writing is required from the inner side. The superficial guilty ones squeeze up to the door frame. Closing the openings can only be done by means of retinal cleansing and obovazkovogo zmochuvannya surface.
Installation of telescopic extensions
This type of virob is a unique perevagi.
- There are many fixes at the out-of-the-box construction.
- Superficially, they lie one to one.
- It is easy to add complementary parts to each other.
- Dobory at the tsy configuration you can make up your mind or uphill or down.
- You can change the middle and call it viroba.
- The reserve for the running of the parts is not large, but the process of milimetry allows you to adjust as accurately as possible the position of additional adjustments and adjustments, as the bullets are allowed before the hour of adjustment.
- Special "adjusting" grooves to tamper with the design by hand and downtime in installation.
At once from the box
The way to do it is to take the whole structure in front of the wall to the wall. The first box and it is ready to be picked up in one piece. Dodatkovy elements, scho widen the openings, fasten to the door frame. The message is to show the fixation of the finished virob.
You will be nice to be so happy:
- Carnations should be stuck in a single place in order to press the additional panels to the door frame. The stench does not indulge in usunenny.
- In the process of drilling openings, it is possible to create a hole on the face side of the hole and with mowing. To that, all robots need to be visually accurate.
06.04.2014 07:00
Buy mіzhkіmnatnі doors, my stikmosya with phrases: "if you need to get up, then ..." , and will you need more?... etc. Do you do it? I'll explain in the report:
Yaki will dobory?
Dobir є with a "board" of more than 2 meters (207-215 cm), with a size of 10 mm, which is chipped from one side in the same color as our doors. And the axis is sized according to the width of the left model of doors, there are different standards, the newest sizes of the width of the add-ons: 10 cm, 12 cm and 15 cm, the length is 20 cm, but you can add 40 cm of the overhead. As soon as you need it, you will need it for replacement. I don’t bach the senses їх work more wider, less than 20 cm, so you can start building the warehouse dobir (combinuvati їkh), but it’s simpler, less stand up dobir with a width of 40 cm.
What do you need for more?
In order to add (build up) the width of the door frame, the width is less than the width of the wall of the door opening. For example, the width of the wall in the opening, where you want to install the door, is 17 cm, and the width of the door frame is 7 cm, so we need to add 17-7 = 10 cm. in the middle (In the groove from the rear side of the box). It means that we need to add 11 cm wide. We marvel at the standard і, yaksho є 12 cm, meaning we take 2.5 clubs (dodatkovo doshki) on the whole openings. Zayviy centimeter door installer himself zrіzhe. Yaksho is mute 12, and є 15 cm, which means we take їkh.
The same butt: Tovschina is the size of the door opening we have at the bottom of 8 cm, and at the height of 7-7.5 cm. Walk, how do we need extra (for the maximum width of the frame) 8-7 + 1 = 2 cm? Chi buvayut takі dobori? Such a width is unlikely to be installed, it seems simple - we need 1.5 additional boards 10 cm wide for 1 space (so that 1 additional installer should be released by two, and insert a little more into the groove of the box). Place the attachment for the additional add standard type, platbands are not telescopic... Well, you have a telescopic surplus (wonder at the end G- figurative), so that it is unnecessary to be inserted with its own protruding spike into the groove of the box and by itself allow here some more visunuti, and here less in the range 0-1.5 cm... Otzhe, vikoristovuchi telescopic redundancy, we can do without additional add-ons for growth from a wall to 9 cm for large types of doors, as well as for doors Profile Dors , unaffected by those who have a thorn for qih doors 2 div. Tobto, as long as you have tovschina stini vid 8.5 to 10 cm, then there is already good luck! The maister's confirmation of the groove on the door frame by the policeman on the stake and to fasten the rop-ons to the screws or screws. It’s the folding moment of the robot, and the doorway is not shown to you in such a way of fastening to the good. Corrupt!))
Vzagal about telescopic lashtvi I want to tell you more. In spite of that, put a monument to that wine-dweller. And the telescopes are not just in the one that is happy on the doors, judging from the butt, so they can be played in the aesthetically designed doors, with inappropriate opening walls! In order for the door to be conceived at you schіlno (correctly), lіva that right wіth a door opening are guilty of being in the same area, and not with a propeller! For the most part, it’s too big, if the repair of the wall is not on the lighthouses. So the axis is here for us a little extra telescopic too much! Tobto mi mogo trohi stuff the door frame (Up to 1cm) I am in the middle of the opening, and for despair - hang out all the way through the wall, by ourselves, through the door on the stool. So, well, big plus, with victorian telescopic ones, I don’t know minus.
At our store there are small doors with telescopic platbands You can choose the next category:
How much do you want to get up?
The installation of additional items is a subtle and vague "nuance", about which, as a rule, the customer is aware of during the installation process, in which it will be enchanted, the odds of the installation of doors are already seen! The axis of what is not easily carried out at a low price for the installation of doors. Part of the installation of add-ons on intermediate doors, which, as a rule, lie at the width of the add-on. Deyakі fіrmi zbіlshuyut part in the installation of add-ons on the skin 5 cm width!
Chim me smash?
- The doors and the installation are overwhelmed by us, because of all your loves and because of the number of additions, so that the installation did not run out of interest, and that means you will not have to overpay
- Installation of doors with a complete set without additional costs is the same for us.
- The price for the installation is to be swapped in case of failure and not to change in the meantime, to navigate as it was not done.
- Our reputation is important to us, because guarantee on the installation of inter-room doors mi daєmo 3 rocky!
And the yak axis is visible to add on the butt of our robots:
The table will help you, if you need to add a number of additional doors. .
| Tovschina wall door opening. | Dobirna doshka (pcs.) | |||||||
| Single-seat doors | two-storied doors | |||||||
| 10cm | 12div. | 15cm | 20cm | 10cm | 12cm | 15cm | 20cm | |
| 5 - 7 cm | - | - | - | - | - | - | - | - |
| 7.5 - 11 cm | 1.5 pcs. | 2 pcs. | ||||||
| 11.5 - 12 cm | - | 1.5 pcs. | - | 3 pcs. | ||||
| 12.5 - 16 cm | 2.5 pcs. | 3 pcs. | ||||||
| 16.5 - 21 cm | 2,5pcs | - | - | 3 pcs. | ||||
| from 21.5 - 26.5 cm | - | - | - | 2.5 pcs. | - | - | - | 3 pcs. |
If you have lost food -
- In contact with 0
- Google+ 0
- OK 0
- Facebook 0
